Macos Waiting For Other Installations To Complete

Tip & Tricks to Fix Mac Installation Failed/Stuck/Frozen/Slow Errors

If your Mac is unable to install macOS Big Sur or freezes on installing, you can try to fix it with the following tips. There is no guarantee that each tip works on macOS update problems. But it covers the common measures when Mac users fails to install new macOS, hopefully any of these tips will work for your macOS installation problem.

  • When an installation happens a daemon installd runs. Killing a leftover installd should allow another installation to happen (and will kill any new ones that are waiting for the defunct one to finish).
  • Follow the steps to install macOS Big Sur the same way you would through System Preferences. What if macOS Big Sur freezes or stops responding? You can start by waiting. If you have time, leave your Mac for a while. It might work itself out after half an hour. If you can't wait or waiting just doesn't work, you'll have to force a reboot.

Restart your mac in to Recovery Mode by holding down the Command (⌘) and R keys during startup. Go to disk Utility and run the First Aid for Macintosh HD. Make sure your mac is connected to WIFI. Attempting to download macOS High Sierra from the Mac App Store I found that a small 19 MB version of the “Install macOS High Sierra.app” file downloads to the “Applications” folder, rather than the complete 5.2 GB installer file.

1. Shut down your Mac and wait for some time. When a new OS releases, a massive number of people will go to download and install the updates in a snap. As a result, the downloads and installation will be very slow with the large file and many people doing the same thing at the same time, and even fail during the process. What you should do is to wait for the server becoming less busy. According to Apple system status page, macOS Software Update issue has been resolved. Now you should download the macOS Big Sur update file faster and install it without seeing 'An error occurred while installing the selected updates'message.

2. Go to Mac App Store and open updates. If your Mac install stuck on Apple logo, gray/white/black screen when you were installing an App, you can go to Mac App Store to find this app and open the updates to survive from the macOS installation stuck situation.

3. Download & install the combo update. The Mac App Store isn't the only place to download macOS from. When your encounter problems on macOS Big Sur installing, you can try to download the combo macOS update from the Apple official site because the macOS installation package downloaded from Mac App Store may only include the essential files for your Mac update, instead of the combo updater with all the files required to update to macOS.

'macOS 10.13 High Sierra is now available for update on Mac computers and can anyone of you tell me some tips that can help me smoothly update my MacBook Pro into latest macOS High Sierra without losing any data or meet any problems? Thank you.'

Corso fotografia national geographic pdf. If you are trying to find a simple way to update Mac OS to the latest 10.13 or 10.13.4 High Sierra or you are looking for effective solutions to fix macOS High Sierra update stuck or failure error, you are at the right place. Follow the two next parts to free download macOS 10.13/10.13.4 to install and fix the macOS High Sierra update error right now.

Part 1. Upgrade to macOS 10.13/10.13.4 High Sierra without losing data

Complete

Here Part 1, we'll show you how to upgrade to macOS 10.13/10.13.4 High Sierra without losing any data on MacBook Pro/MacBook Air/iMac etc.

Step 1. Back up Mac computer data before macOS 10.13/10.13.4 update

Here you have two options to backup Mac data before macOS 10.13/10.13.4 update: Time Machine or Mac backup software for help.

Option 1. Back up Mac data with Time Machine

  1. 1. Connect an external hard drive to your Mac and launch Time Machine. (The drive should be at least the same size as your Mac drive.)
  2. 2. Turn the Time Machine slider ON > Select Backup Disk to set the external hard drive as the backup destination.
  3. 3. Select important data to backup now.

Option 2. Backup Mac data with Mac backup software

EaseUS Todo Backup for Mac supports backing up your Mac data in 3 steps:

1. Download, install and launch EaseUS Todo Backup for Mac.
Click the first Backup tab or simply click the plus (+) button at the left corner of the left pane to create a backup project -- name the backup project and click OK.

2. Set up the backup destination where you want to store Mac files as backups, automatic backup frequency and click OK.

3. Add files and folders to the backup project.
Click File+ Chad abbottthe initials game. to selectively choose files and folders to back up and click the blue start button to back up your Mac data to another drive or external device.

Step 2. Download and install macOS 10.13/10.13.4 High Sierra

1. Go to the Apple store > Find macOS 10.13.10.13.4 update.
2. Click Download and fill in your Apple ID when asked.
3. After you download the macOS 10.13/10.13.4 upgrade software, install the software and update Mac computer to macOS 10.13 or 10.13.4 High Sierra by following the onscreen instructions.
If no update problems occur, restart your Mac computer and enjoy the new macOS on your device.
If you get stuck or cannot install macOS 10.13 on your device, just follow Part 2 to get the problems solved and fixed on your own.

Part 2. Fix macOS 10.13/10.13.4 High Sierra update stuck/failure or freeze error

If you cannot download or install macOS 10.13 update on your Mac, or macOS 10.13/10.13.4 gets stuck, freezes or fails to install, don't panic and just simply follow these instructions.

Fix 1. macOS Sierra 10.13/10.13.4 downloaded but won't install

If you get stuck or fail to install the downloaded macOS 10.13/10.13.4, try the tips below to get this problem fixed:

  • Open Launchpad > Delete 'Install macOS Sierra' file with a question mark on it.
  • Reboot Mac and retry downloading a new macOS Sierra update 10.13/10.13.4.
  • Click Apple Menu > Select App Store > Click Update next to macOS Sierra in the Update section.
Macos Waiting For Other Installations To Complete

Fix 2. macOS 10.13/10.13.4 High Sierra fails to install/gets stuck or freezes while installing

Here you have two options to fix the macOS 10.13/10.13.4 installation failure error:

Option 1. Install macOS update in Safe Mode to fix the macOS High Sierra 10.13/10.13.4 update stuck error

  • Disable or uninstall any Anti-virus software on your Mac.
  • Ensure Mac computer has a proper and reliable internet connection.
  • Install macOS Sierra in Safe Mode.
  • Hold Power until your Mac shuts down > Turn your Mac on and hold the Shift key > Release Shift when the Apple logo appears > The Mac shall be booted into the Safe Mode.
  • Then try to install macOS 10.13/10.13.4 update again.

If you cannot install macOS 10.13/10.13.4 in Safe Mode, try a clean installation of the new update.

Option 2. Clean installation of macOS Sierra 10.13/10.13.4 to fix macOS fails to install issue

To complete a clean installation of macOS Sierra 10.13/10.13.4 on Mac, you may need to do some pre-installation preparation:

Step 1. Create a bootable installer

  • Download the macOS Sierra 10.13/10.13.4 installation package from Mac App Store.
  • Connect a new USB drive with Mac > Open Disk Utility in Applications/Utilities folder > Select thumb drive in sidebar and click Format.
  • Name USB as Untitled > Choose OS X Extended > Click Erase > Open Terminal once the USB is formatted and finish downloading macOS Sierra.
  • Ensure USB named Untitled is connected to Mac > Type below command in Terminal and hit Enter: sudo /Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/SierraBootInstall --applicationpath /Applications/Install macOS Sierra.app --nointeraction &&say Done
  • Enter Administrator password if necessary. The command will create a bootable Sierra installer on the USB drive.

Step 2. Clean installation of macOS 10.13/10.13.4 update

  • Connect a USB bootable drive to your Mac and restart the Mac by holding Option until you hear the reboot tone.
  • Select the disk called Install macOS Sierra in the drive list that appears on the screen.
  • Once the USB drive is booted, select Disk Utility > Choose Mac's startup from the list > Click Erase.
  • Once Mac's startup disk is formatted, return to the Utilities window and select Install macOS > Choose the recently erased startup drive to install macOS > Follow onscreen prompts to complete the installation.

Extra Tip: Restore lost data due to the macOS 10.13/10.13.4 High Sierra update

If you forgot to create backups for your Mac data before the macOS 10.13/10.13.4 update, you still have a chance to restore lost data due to the update.

Professional Mac data recovery software - EaseUS Data Recovery Wizard for Mac with Bootable Media allows you to restore all lost data due to a macOS update or for other reasons.

Macos Waiting For Other Installations To Complete Time

1. Click the tutorial page about how to create bootable media for Mac.
2. Boot your Mac from EaseUS Data Recovery Wizard for Mac Bootable Media.
3. Launch EaseUS Data Recovery Wizard for Mac and select the file types of lost data. Click Next.
4. Choose the volume where the data was lost, click Scan to let the program scan the lost data for you.
Choose Deep Scan and let the program find more lost data for you on your Mac.

Macos Waiting For Other Installations To Complete Version

Important Note -- if your Mac hard drive uses an APFS file system, you can only use the deep scan option to scan and find all lost data on the drive

5. Preview and choose the found hard drive data, then click Recover to save it in a safe spot on your Mac.